Power Washing
Ground Surface Cleaning
Ground surface cleaning for driveways, walkways, sidewalks, patios and pool decks involve a two step chemical treatment and pressure cleaning process. This process differs slightly between types of surfaces from bare concrete, pavers, stone, travertine or tile for example, because some of these surfaces are “softer” than others.
We adjust the chemical solution and adjust the level and concentration of pressure accordingly, for each type surface and its condition. This process rids surfaces of mold, algae and other debris or fallout that causes staining for a brighter, longer lasting cleaning.
We recommend cleaning ground surfaces, especially high traffic/high use areas, like driveways, once a year. Depending on the type of surface, once it is clean and refreshed, we may recommend and offer to seal the surface. Sealing ground surfaces requires very specific and important procedures like stripping of old sealer, pressure cleaning, sanding joints if necessary and finally sealing the surface.
Each of these steps have critical factors in completing sealing jobs properly. We offer only the highest quality sealer available, that will protect and restore beauty to paver, stone and travertine surfaces without making them slippery or unsafe. Because we only use the highest quality sealer available and observe the proper procedures we are proud to be able offer one of the best warranties available in sealers of up to 3 years! These processes are safe, efficient and effective for single family homes, HOA’s and entire communities. All normal activities can be resumed immediately upon completion of any of our jobs.
Read more about our Exterior Wall and Surface Cleaning
“No Gimmicks, Just An Honest Clean!”
Once you experience the difference, you’ll never look for an alternative again. Your Satisfaction is Guaranteed!
Wall Cleaning & Surface Cleaning
Exterior wall cleaning and surface cleaning involves multiple processes depending on the requirements of each job. First, we “dry brush” all insects, cobwebs, cocoons and debris from walls, doorways, windows and eaves.
“Dry brushing” first is a critical step, because if the areas to be cleaned are wet, the cobwebs, cocoons and insects will stick to the walls and would then require potentially damaging high pressure, high volumes of water and aggressive chemicals to remove them.
Next, a chemical treatment is applied only where necessary, for removal of mold, algae and rust staining. Finally, we use a reduced pressure clean water rinsing of all walls, windows and doorways that removes any remaining debris or residual chemicals and will not damage painted, natural or glass surfaces.
We recommend repeating this process as necessary, as each structure due to differing conditions, may need attention more often. This process is safe, efficient and effective for single family homes, HOA’s and entire communities. All normal activities can be resumed immediately upon completion of any of our jobs.
Complete Exterior Cleaning Services
Complete exterior cleaning service “packages” are available. The goal of complete exterior cleaning services is to remove dirt, grime, mold, and other unsightly buildup from the exterior surfaces of a building, improving its overall appearance and protecting it from damage. Value added packages consist of a combination of all of our services, some services at a reduced “package” rate. From roofs to ground surfaces and everything in between, we can take care of all of your exterior cleaning projects in one easy, comprehensive job. This process is safe, efficient and effective for single family homes, HOA’s and entire communities. All normal activities can be resumed immediately upon completion of any of our jobs.
Read our latest blogs
“No Gimmicks, Just An Honest Clean!” Once you experience the difference, you’ll never look for an alternative again. Your Satisfaction is Guaranteed!
Request Free Estimate